Introduction The device is applicable to different testing and correctoperations under hydraulic pressure for various types of medium-and heavy duty cars, engineering vehicles, diesel locomotives, tractors, shipping with engine connecting rod of the large aperture diameter: Φ66-110mm,the core-distance between both apertures: 140-300mm.
main technical parameters 1. Large end aperture caliper diameter of the connecting rod Φ66-110mm 2. Height between the worktable surface and the center of the mandrel 550×320×275 mm 3. The core-distance of the tested connecting rods140-300mm 4. Max.pressure intensity of cylinder≤15MPa 5. Operating stroke under hydraulic pressure ≤40mm 6. Max.pressure of the piston rod40T 7. Weight80Kg
connecting rod inspection First put the connecting rod to be corrected onto a mandrel expansion block and use an adjustable jack to support wrist pin end of connecting rod to make 2 center holes parallel with each other. Fasten the mandrel expansion block and adjust dial indicator frame in place in order to use upper and side meters to measure the upper and side surfaces of wrist pin. Set dial indicator to zero and use thumb, forefinger and middle finger to hold the handle ball of slide carriage to push the slide carriage slightly in order to contact measuring head with wrist pin end. Then twisting value is shown on upper meter and bending value is shown on side meter.
Audited Supplier 
){kind=link}